| Lulzbot Aerostruder cooling problems, now this is annoying! | |
|---|---|
| Tweet Topic Started: Mar 29 2018, 09:53 AM (3 Views) | |
| JesinBrodey | Mar 29 2018, 09:53 AM Post #1 |
|
Hello! So the new Aerostruder from Lulzbot is causing me some headaches. The new fan is so powerful that turning it on causes the hotend to rapidly cool if you are too close to the print bed.The old settings of cranking it to 100% on layer 2 will drop the hotend temp so quickly the printer can error out and abort the print. Apparently the newer version of Cura for Lulzbot will vary tempature and cooling values as a percentage of height whereas we S3D folk have to add 81 entries into the cooling list to smooth out the transitions to 80% fan on. The bridges are set to 100% fan on. No blipping the fan either! It has no problem starting on 1% by itself. Please help. I didn't find the right solution from the Internet. References:- https://forum.simplify3d.com/viewtopic.php?f=9&t=9295 Digital Animation Video Thanks |
![]() |
|
| 1 user reading this topic (1 Guest and 0 Anonymous) | |
| « Previous Topic · Most Glorious People's Center for Application to Become Most Glorious People's Heroo · Next Topic » |





2:16 PM Jul 11